RX-150 FOB Receiver vs. PG-300 Pager: Which Do You Need?

Quick answer

Choose the RX-150 FOB Receiver only if you already own a FOB handheld transmitter and need stimulation plus tone. Choose the PG-300 Pager Only Receiver if you want a non-stimulation cue or plan to use a compatible transmitter for pager signals. Neither is a universal replacement.

Compatibility is the first filter

The RX-150 FOB Receiver is explicitly limited to FOB handheld transmitters. That single fact eliminates it for owners of other E-Collar Technologies systems, even though it is a capable receiver. The PG-300 Pager Only Receiver has no such stated restriction in the supplied information, but that does not guarantee compatibility with every transmitter. Check your transmitter model before ordering either unit.

If you are replacing a lost or damaged receiver, match the replacement to the transmitter you already hold rather than to the dog or the task. Expanding a one-dog system to two dogs works only when the new receiver speaks the same language as your current handheld.

Stimulation versus pager-only cueing

The RX-150 is a standard receiver that supports the full FOB Educator FE-580/582 feature set, including stimulation. The PG-300 is pager-only: it delivers a vibration-style cue without electrical stimulation. That makes the PG-300 a different training tool, not a lower-powered version of the RX-150.

The trade-off is straightforward. The RX-150 gives you the complete range of corrections and cues your FOB system offers. The PG-300 gives you only the pager channel, so it suits a dog that already responds to vibration or a handler who deliberately avoids stimulation. If your training plan depends on stim levels, the PG-300 cannot replace that function.

Price and system expansion

At catalog prices, the PG-300 lists at USD 47.50 (comparison price USD 95.00) and the RX-150 at USD 62.50 (comparison price USD 125.00). The difference is modest, so let function and compatibility decide rather than the small gap in cost.

For expanding a one-dog FOB system, the RX-150 is the natural second receiver because it matches the FOB handheld. Adding a PG-300 to the same system only makes sense if you specifically want a pager-only cue for the second dog and your transmitter supports that mode.

Trade-offs at a glance

• RX-150 compatibility: Works only with FOB handheld transmitters. If you own a different series, this receiver is not an option. Check your transmitter model first; compatibility overrides every other feature.
• PG-300 function: Pager-only means vibration cues, no stimulation. It cannot deliver stim corrections even if your transmitter can. Choose the PG-300 only if your training plan uses pager cues instead of stim.
• Price difference: The RX-150 lists at USD 62.50 and the PG-300 at USD 47.50. The gap is small enough that function should drive the decision. Do not pick the cheaper unit if it removes a feature you rely on.

Product facts

• RX-150 FOB Receiver: The FOB RX-150 receiver is only compatible with the FOB handheld transmitter. Confirm your transmitter is a FOB model before buying; this receiver will not pair with other E-Collar Technologies handhelds.

  

• PG-300 Pager Only Receiver: The PG-300 is a pager-only collar receiver that uses vibration as a mental cue rather than electrical stimulation. It is the right choice only if you want a non-stimulation signal and your system supports pager-only receivers.

  

Which one fits your situation?

Best for

• Owners of a FOB handheld transmitter who need stimulation and tone in a replacement or second receiver.
• Handlers expanding a one-dog FOB system to two dogs with matching equipment.

Not for

• Owners of non-FOB E-Collar Technologies transmitters, who need a different receiver.
• Handlers who want only pager cues without stimulation, who should choose the PG-300 instead.